How You Can Stop A Leaky Faucet Yourself

Plumbing needs to be done right! It can create more trouble and expense if it is not done properly! Not everyone is a plumber. If you are not up to the job, hire it out! If you can do-it-yourself, that is great! You will need the right tools and know how. Read this article for some handy tips and tricks!

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.

Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face plumbing problems during the winter. This precaution will save time, money and effort.

If you have drains in your house that have not been used for a long period of time, pour one gallon of water through them to keep them functional. Furthermore, this will have the added benefit of reducing any odors from entering your house from lack of use during the year.

If you have grout caught in your line, it’s most likely impossible for you to clean yourself. The grout can be broken up and sent further down. Plastic pipes are more conducive to clearing grout than metal pipes. However, this will most likely require a professional to do the job.

To avoid freezing pipes in the winter, make sure to insulate any exposed pipes in you basement before winter comes. Pay extra attention to pipes near the outside walls. If you have had a problem with any particular pipe freezing in the past, apply some heat tape to insulate those pipes.

Never hire a plumber that is not licensed, insured and bonded. If the plumbing company cannot provide you with reference numbers for their credentials, move on quickly. It is a common question and it should be a no-brainer for them to provide them to you. If they have issues with you asking, take that as a big red flag.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.

Hopefully, you have found the tips and tricks above to be quite handy! Whether you hire out the job or do-it-yourself, take the necessary time to do it right. It can create more trouble and expense in the future, if it is not done properly!

Leave a Reply

Your email address will not be published. Required fields are marked *